Additional Information; Troubleshooting; Specifications - Pioneer X-DS301-K Bedienungsanleitung

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. Check the points below
when your X-DS301-K does not operate properly. The problem sometimes may lie in electrical
components, please also check the components and appliances being used. Contact your
nearest Pioneer authorized service if the problem still exists.
If this happens:
No audio stream or music intermittency.
The power does not turn on.
Can't operate the remote control.
The clock is not set to the correct time.

Specifications

• Amplifier section
RMS power output: 2.5 W + 2.5 W (1 kHz, 15 % T.H.D, 4 Ω)
• Tuner section
Frequency range (FM): 87.5 MHz to 108.0 MHz
• Speaker section
Transducer: 36 mm Full Range Driver (Impedance: 4 Ω)
• Miscellaneous
Power requirements: AC 100 V to 240 V, 50 Hz/60 Hz, DC 5 V/2 A
Power consumption: 10 W
In standby: 0.65 W
Dimensions (W) × (H) × (D): 243 mm × 46 mm × 150 mm
Weight: 660 g
Specifications and the design are subject to possible modifications without notice, due to
improvements.

Additional Information

Try this:
• Check power supply to make sure it's
• Check 3.5 mm AUX IN cable to make sure
• Check iPod/iPhone connection to make
• Check sources to make sure your audio
Use the AC adapter and connect the device
to the power plug on the wall.
Replace the batteries.
• Replace the batteries.
• Reset the clock.
16
correctly connected to the outlet.
it's correctly connected.
sure it's correctly docked.
input is switched to correct source.