Herunterladen Inhalt Inhalt Diese Seite drucken

Settings; Controlling The Sound Bar With Tv Remote Control; (Tv Remote Control Learning Function) - Yamaha YAS-201 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 31

Settings

Controlling the sound bar with TV remote control

(TV remote control learning function)

You can use the TV remote control to turn on/off the sound bar or adjust its volume by having the
sound bar learn the TV remote control signals.
NOTE
• This function is available only when your TV remote control uses infrared signals.
• Depending on the installation conditions or settings of the sound bar, both the sound bar and TV will receive the TV
remote control signals and operate simultaneously.
1
Turn off the TV and sound bar.
2
Hold down LEARN on the supplied remote control for more than 3 seconds to
set the sound bar to the learning mode.
When the sound bar is in the learning mode, the indicators on the front panel flash as shown
below.
3
Make the sound bar learn the volume (–) operation.
3-1
Press VOLUME (–) on the front panel of the sound bar.
INPUT
– VOLUME +
3-2
While pointing your TV remote control at the remote control sensor, hold down the
volume (–) key for more than 1 second twice or three times.
Approx. 30 cm (1 ft)
VOL
VOL
Hold down
(more than 1 second)
(more than 1 second)
Result
Bleep/buzzer
Successfully
Once
learned
10
En
TV
BD/DVD
YIT
SURROUND CLEAR VOICE UNIVOLUME
DTS
D
PL
SUBWOOFER
INPUT
– VOLUME +
TV remote control
VOL
VOL
VOL
VOL
Release
Hold down
(more than 1 second)
(more than 1 second)
Indicators
Lights up
Learning has
failed
4
Make the sound bar learn the volume (+) operation.
4-1
Press VOLUME (+) on the front panel of the sound bar.
INPUT
– VOLUME +
4-2
While pointing your TV remote control at the remote control sensor, hold down the
volume (+) key for more than 1 second twice or three times.
Result
Successfully
learned
Learning has
failed
5
Make the sound bar learn the power operation.
5-1
Press
INPUT
– VOLUME +
5-2
While pointing your TV remote control at the remote control sensor, hold down the
power key for more than 1 second twice or three times.
Result
Successfully
learned
Learning has
failed
6
To finish the learning mode, press LEARN or
control.
VOL
VOL
This completes the necessary settings. Now you can operate the sound bar with the TV remote
control's power key or volume keys.
Release
HINT
• The learning mode will be finished automatically if no operations are performed for 5 minutes.
• Set the TV volume to minimum. When you turn up the volume of the sound bar with the TV remote control, the
volume of the TV may be turned up at the same time. In this case, follow Step 3 in "Connections" (p.7) to change the
TV setting.
Twice
* Repeat from Step 3-1.
Bleep/buzzer
Indicators
Once
Twice
* Repeat from Step 4-1.
(power) on the front panel of the sound bar.
Bleep/buzzer
Indicators
Once
Twice
* Repeat from Step 5-1.
(power) on the supplied remote
Flashes
Lights up
Flashes
Lights up
Flashes

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis