Yamaha YAS-201 Bedienungsanleitung Seite 11

(power) key
Turns on or off (standby) the sound bar.
HINT
• If you turn on the sound bar, the sound bar and subwoofer will be
connected wirelessly and the SUBWOOFER indicator on the front panel
of the sound bar will light up. If the indicator does not light up (or remains
flashing), change the group ID (p.11).
SUBWOOFER
Flashes (preparing)
SUBWOOFER
Lights up (connection established)
SURROUND and STEREO keys
Switch between surround and stereo (2 channel) playback.
When surround playback is selected, you can enjoy a realistic
sound effect using Yamaha's exclusive AIR SURROUND
XTREME.
SURROUND
Lights up (surround playback)
SURROUND
Off (stereo playback)
HINT
• When 2-channel stereo signals are played in surround, the
indicator lights up.
PL
Lights up (Dolby Pro Logic II)
MUTE key
Mutes the audio output. Press the key again to unmute.
Flashes (on mute)
CLEAR VOICE key
Enables/disables the clear voice function. When this function
is enabled, you can enjoy clear voice sounds while watching
movies, TV dramas, news programs or sports programs.
CLEAR VOICE
Lights up (clear voice is enabled)
UNI VOLUME key
Enables/disables the UniVolume function. When this function
is enabled, the sound bar automatically adjusts its volume so
that different TV channels, programs and commercials will
be played at the same volume.
UNI VOLUME
Lights up (UniVolume is enabled)
HINT
• The UniVolume function is automatically disabled when "YIT" is selected
as the input source.
AUDIO DELAY key
Adjusts the audio delay to synchronize the sound with the
video when the video image on the TV may seem delayed
with respect to the sound.
Follow the procedure below to adjust the audio delay.
1 Hold down AUDIO DELAY for more than 3 seconds.
The left most indicator flashes.
PLII
2 Press SUBWOOFER to adjust the audio delay.
Smaller delay (–)
3 To finish the adjustment, press AUDIO DELAY.
HINT
• The adjustment will be finished automatically if no operations are
performed for 20 seconds.
• The audio delay setting does not work when "YIT" is selected as the
input source.
Decoder indication
The sound bar supports the following audio signals. You can
check the type of the input audio signal by the color of the
indicator.
D
Green (Dolby Digital), Red (DTS Digital Surround)
DTS
D
DTS Off (PCM)
Auto-sleep function
The sound bar will be automatically turned off when one of the
following conditions is met.
• No operations for 12 hours
• No audio input and no operations for 1 hour
• No operations for 10 seconds after a wireless connection
(AirWired) to a transmitter (sold separately) is terminated
Larger delay (+)
9
En