Control Panel; Switching Off; Temperature Regulation - Electrolux A71108TSW0 Benutzerinformation

24

Control panel

CONTROL PANEL
1 Green On/Off Indicator Light
2 Temperature Regulator and On/Off Switch
3 Yellow Fast Freeze Indicator Light
4 Acoustic Signal Stop and Fast Freeze Switch
5 Red Alarm Indicator Light
Switching on
1. Allow the appliance to stand for 4 hrs after installation.
2. Insert the plug into the wall socket.
3. Turn the Temperature Regulator clockwise to a temperature lower than << - 16 °C >>
position.
4. The Green On/Off Indicator Light will light up and Red Alarm Indicator Light will blink.
5. The lighting up of the Green On/Off Indicator Light means that the appliance is switch-
ed on.
6. The blinking of the Red Alarm Indicator Light means an improper temperature in the
freezing compartment. In addition, an intermittent sound can be heard, which can be
stopped by pressing the Acoustic Signal Stop and Fast Freeze Switch once.
7. When switching on the freezer for the first time, the Red Alarm Indicator Light will
blink until the internal temperature has reached a level required for the safe conserva-
tion of frozen food.

Switching off

1. To turn off the appliance, turn the Temperature Regulator to the "O" position.
2. To disconnect the appliance from the power disconnect the mains plug from the wall
socket.

Temperature regulation

The temperature within the appliance is controlled by the Temperature Regulator situated
on the control panel.
To operate the appliance, proceed as follows:
• turn the Temperature Regulator toward lower settings to obtain the minimum coldness.
• turn the Temperature Regulator toward higher settings to obtain the maximum coldness.
A medium setting is generally the most suitable.
1 2 3 4 5