Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction manual
OPERATION - Insert batteries
1. Open the battery compartment at the backside, push the clip
down and after that pull it to yourself.
2. Insert 2 x AA type 1.5V battery with the poles as indicated in
the battery compartment
3. Place the cover back on the battery compartment.
OPERATION
1. Remove the protective cover from the cutting head.
2. Position the garment on a flat surface.
3. Switch on the appliance by pressing the On/Off switch.
4. Lightly stroke the appliance back and forth on the garment. Fuzz and threads are shaved and collected in
the fuzz holder.
5. After a garment has been completed, please clean the foil cap before starting with a new garment, to
avoid fuzz is being transferred.
6. Switch off the appliance.
7. Fit the protective cover onto the cutting head.
CLEANING AND MAINTENANCE
Clean the appliance every time after use.
1. Switch off the appliance and remove the batteries.
2. Remove the fuzz holder and empty it (see figure 3).
3. Remove foil cap by turning it (see figure 4).
4. Gently pull out the blade unit,
5. Remove any residue with the cleaning brush. Be careful with the blades, as they can get damaged easily.
6. Put the appliance together carefully.
Figure 3
•
Don't rinse it under the water tap.
•
Don't use any aggressive cleansers.
GUARANTEE TERMS
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for 60
months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
Figure 4
Figure 5
13
Figure 2
Figure 6
Werbung
Inhaltsverzeichnis
