Inhaltsverzeichnis; Introduction - Parkside PTK 2000 B2 Originalbetriebsanleitung

G B
Content
Introduction .................................... 6
Intended purpose ............................ 7
General description ......................... 7
Extent of the delivery ....................... 7
Overview ....................................... 8
Functional description ....................... 9
Technical data ................................. 9
Safety Instructions ............................ 9
Symbol and icons ............................ 9
Symbols on the appliance ................. 9
Assembly ...................................... 17
Mounting of the Frame .................... 17
Mounting the table width and length
extension ...................................... 18
Mounting the Suction Adapter ......... 18
Mounting the Riving Knife ............... 18
Mounting/dismounting the
Saw Blade Guard ......................... 19
Replacing the Table Insert ................ 19
Adjusting/mounting the Riving Knife . 19
Attaching/changing the Saw Blade .. 20
Before putting into operation ........... 20
Operation .................................... 20
Switching on and off ..................... 20
Adjusting the Cutting Depth ............. 21
Angle Adjustment ........................... 21
Working with the Parallel Stop ......... 21
Adjusting the Stop Height ............... 21

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
6
Turning the Stop Rail ....................... 21
Adjusting the Cutting Width ........... 21
Adjusting the Stop Length ................ 22
Adjusting the Parallel Stop .............. 22
Transverse stop .............................. 22
Adjusting the Scale of the
Transverse Stop ............................. 23
Using the Laser ............................. 23
Adjusting the Laser ........................ 23
Operation .................................... 23
Performing Longitudinal Cuts .......... 24
Cutting narrow Workpieces ............ 24
Cutting very narrow Workpieces ..... 24
Performing Bevel Cuts .................... 25
Performing Transverse Cuts ............. 25
Cutting Chipboard ........................ 25
Transport ...................................... 25
Cleaning and Servicing ................. 26
Cleaning ....................................... 26
Storage......................................... 26
Waste disposal and environment
protection ..................................... 26
Spare parts/accessories ................. 27
Guarantee ................................... 28
Trouble Shooting ............................ 30
Service-Center .............................. 31
Importer ....................................... 31
Translation of the original
EC declaration of conformity ......... 134
The operating instructions constitute part of
this product. They contain important infor-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.