Technical Data - AEG Electrolux L 56840 Benutzerinformation

26

Technical data

The door will not open:
The machine vibrates is noisy:
The machine makes an unusual noise:
No water is visible in the drum:
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and pur-
chase date of your machine: the Service Centre
will require this information.
TECHNICAL DATA
Dimensions
Problem
Width / Height / Depth
Possible cause/Solution
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait a few minutes.
There is water in the drum.
• Select drain or spin programme to empty out
the water.
The transit bolts and packing have not been re-
moved.
• Check the correct installation of the appli-
ance.
The support feet have not been adjusted.
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the
drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
The machine is fitted with a type of motor
which makes an unusual noise compared with
other traditional motors. This new motor en-
sures a softer start and more even distribution
of the laundry in the drum when spinning, as
well as increased stability of the machine.
Machines based on modern technology operate
very economically using very little water with-
out affecting performance.
60 / 85 / 63 mm