Herunterladen Inhalt Inhalt Diese Seite drucken

Additional Information; Troubleshooting - Pioneer DDJ-S1 Bedienungsanleitung

Dj controlle
Vorschau ausblenden Andere Handbücher für DDJ-S1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Additional information

Troubleshooting

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points
below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble
cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
This unit may not operate properly due to static electricity or other external influences. In this case, proper operation may be restored by turning the
power off, waiting 1 minute, then turning the power back on.
Problem
The power is not turned on.
None of the indicators light.
The jog dial indicator does not light.
[MASTER OUT 1] (XLR output)
volume is low, sound quality is poor or
no sound is output.
[MIC1], [MIC2] and [AUX IN] termi-
nals cannot be used.
The indicators are dim.
This unit is not recognized.
This unit operates on USB bus power
even when the included AC adapter
is used.
Power does not turn on when operat-
ing on USB bus power.
This unit cannot be operated.
Music files cannot be played.
Tracks are not displayed on track list.
Recording is not possible.
Sound of an external device or micro-
phone cannot be output.
Volume of device connected to [AUX
IN] terminals is low.
Distorted sound.
Sound being played is interrupted.
32
En
Check
Is the [ON/OFF] switch for power supply set to
[ON]?
Are you operating on USB bus power?
Is the [ON/OFF] switch for power supply set to
[ON]?
Is the included USB cable properly connected?
Is the included AC adapter properly connected?
Is the included USB cable properly connected?
The computer's USB power supply capacity may
be insufficient.
Are you using a USB hub?
Are you using a commercially available USB
cable?
Is the driver software properly set?
Are the music files damaged?
Have the music files been properly imported?
Is a crate or subcrate that does not contain any
tracks selected?
Is the external device or microphone properly
connected?
Is the channel you want to record properly
selected?
Is the [MIC2/AUX] selector switch properly set?
Is the MIC/AUX monitor control panel properly set? Depending on the settings, the master sound may not be output. Set the output
Are you operating on USB bus power?
Is the [AUX IN] terminals' [VOL] control set to the
proper position?
Are the [MASTER LEVEL] and [TRIM] controls set
to the proper position?
Is the audio level being input to the [AUX IN] and
[MIC] terminals set to a suitable level?
Is [HEADROOM] in the [SETUP] menu properly
set?
Are the included AC adapter and included USB
cable properly connected?
Is the driver software's latency value suitable?
Remedy
Set the [ON/OFF] switch for power supply to [ON].
There are limitations when operating on USB bus power.
To use the unit without these limitations, connect the included AC adapter.
(page 10)
Set the [ON/OFF] switch for power supply to [ON].
Connect the included USB cable properly. (page 10)
Mount the power plug properly on the included AC adapter.
Connect the included AC adapter properly to the power outlet. (page 5)
Connect the included AC adapter's DC plug properly to this unit. (page 10)
Connect the computer and this unit directly using the included USB cable. USB
hubs cannot be used. (page 10)
Use the included AC adapter. (page 10)
USB hubs cannot be used. Connect the computer and this unit directly using
the included USB cable. (page 10)
Use the included USB cable.
Set the driver software properly. (page 7)
Play music files that are not damaged.
Import the music files properly. (page 17)
Either select a crate or subcrate that contains any tracks or add tracks to the
crate or subcrate.
Check the connection of the external device or microphone. (page 10)
Select the channel you want to record properly. (page 28)
Set the [MIC2/AUX] selector switch properly. (page 28)
method properly. (page 16)
There are limitations when operating on USB bus power.
To use the unit without these limitations, connect the included AC adapter.
(page 10)
Set the audio level to a suitable level for the connected device. (page 28)
Adjust the [MASTER LEVEL] and [TRIM] controls.
Set the audio level input to the terminals to a suitable level for the connected
devices.
Set the level properly.
The sound will be interrupted if the included AC adapter's power cord or
included USB cable is disconnected from this unit during playback.
Properly fasten the included AC adapter's power cord and the included USB
cable to this unit's cord hook. (page 10)
Set the driver software's latency to a suitable value. (page 9)
Set the DJ software's latency to a suitable value. (page 30)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis