Endress+Hauser Liquiphant M FTI52 Anleitung Seite 4

Electronic insert FEI51, FEI52, FEI53, FEI54, FEI55, FEI57S, FEI58
Replacing an electronic insert at housing F15, F16, F17
1
Replacing an electronics at housing F13, T13
1
3 mm
5
Reassembly
Re-assembly is carried out in reverse order.
The sensor socket must be aligned the right position.
The sensor socket can easily be rotated. To avoid any deformation of the plug connection, it must be aligned to the bushing, as shown below:
1 Bushing for holding screws
2 Sensor socket
3 Fixation housing alignment
4
2
3 mm
Electr.F15_1
2
3 mm
Electr.T13_1
Electr.T13_1
1
2
3
Electr.1
3
Electr.F15_2
3
Electr.T13_2
4
Electr.F15_3
4
Electr.T13_3
Endress + Hauser
Electr.F15_4
Electr.T13_4