Connecting To An External Amplifier; Connecting The Ac Power Cord; Turning On The Power - Yamaha DVX-S100 Bedienungsanleitung

Connecting to an external
amplifier
If you want to increase the power output to the speakers,
or want to use another amplifier, connect an external
amplifier to the 6CH PREOUT jacks as follows.
Note
• When you have connected this unit to an external amplifier,
select PRE in "9 SP/PRE OUT" on the SET MENU. (See page
65.)
1 FRONT jacks
Front channel line output jacks.
2 REAR jacks
Rear channel line output jacks.
3 CENTER jack
Center channel line output jack.
4 SUBWOOFER jack
Low bass signals distributed from the front, center and/or
rear channels are directed to this jack if they are assigned
to this jack. (The cut-off frequency of this jack is 90 Hz.)
The LFE (low-frequency effect) signals generated when
Dolby Digital or DTS is decoded are also directed if they
are assigned to this jack.
FRONT REAR
SUBWOOFER
6CH PREOUT
y
• The adjustments made in the following settings have an effect
on the signals output from the 6CH PREOUT jacks.
– BASS BOOST settings
– Speaker settings
– DSP programs
1
2
CENTER
3
4

Connecting the AC power cord

Plug in this unit to the wall outlet.
I Memory back-up
The memory back-up circuit prevents the stored data from
being lost when the power cord is disconnected from the
AC outlet, or the power supply is temporarily cut due to
power failure. However, if the unit is turned off for more
than one week, the stored setting will be cleared. If so, set
the setting again.
• Volume level
• Input source
• Speaker output level (center, rear L/R and subwoofer)
• Sleep timer
• Parameter
• Delay time
• Set menu
• Disc direct
• Preset station

Turning on the power

When all connections are complete, turn on the power of
this unit.
STANDBY/ON
STANDBY/ON
POWER
TV AV SLEEP
TV MODE
INPUT
CH VOL
MUTE
SUBTITLE AUDIO
REC
CODE SET CD
SHIFT DVD
HALL JAZZ ROCK
1 2 3
1
Press STANDBY/ON (POWER (
remote control) to turn on the power of this
unit.
2
Turn on the video monitor connected to this
unit.
Note
• When you use only some of the included 6 speakers or when
using commercially available speakers, adjust speaker mode
settings soon after turning the power on. See "1 SPEAKER
SET (speaker mode settings)" on page 62 for details.
CONNECTIONS
POWER
POWER ( )
TUNER
MD
CD–R
VCR
VIDEO 2
VIDEO 1
AMP
ENTERTAINMENT
4
) on the
19