Yamaha CL5 Referenzhandbuch Seite 284

Parameter
On
Level
To Matrix
Pan/Balance
Pre/Post
ms
DELAY
ON
To Stereo
To Mono
Pan/balance
Pan Mode
On
LCR CSR
Mode
On
Fader
Mute Assign
DCA Assign
Fade Time, On
Channel Link
Cue
Key In Cue
Mute Safe
Recall Safe
Focus Recall
Global Paste
*1 These parameters can be linked between L and R of ST IN channels 1-8.
*2 Applies to parameters for which the MIX channel 1-24 individual Send Parameter setting and the item in the table are both enabled.
*3 Applies to parameters for which the MATRIX channel 1-8 individual Send Parameter setting and the item in the table are both enabled.
*4 These parameters are available if "FADER/ON" or "PROCESSING" for the Send source channel is set to ON. At that time, "WITH SEND" for the Send destination channel must also be set to ON.
*5 Applicable to parameters that function only when ALL is selected.
*6 Applicable only to On/Off.
*7 Valid when they are set for either the Send source channel or Send destination channel.
*8 Settings marked GLOBAL in this table apply to all channels; these settings are GLOBAL RECALL SAFE, FOCUS PARAMETER, and GLOBAL PASTE for PATCH/NAME.
*9 Applies to ALL only when using GLOBAL PASTE, and only to ON/OFF.
*10 Operates differentially
*11 Balance only
*14 Applicable to parameters only when ALL is selected.
RECALL SAFE, FOCUS RECALL, GLOBAL PASTE
*1
Stereo
CHANNEL LINK
ALL
*3
O O
INPUT MATRIX ON
*3
O O
INPUT MATRIX SEND
*11
O
O
*3
O O
INPUT MATRIX SEND
*10 *10
O
O INPUT DELAY
O INPUT DELAY O
O TO STEREO O
O TO STEREO O
*11
O
O
O O
O TO STEREO O
O TO STEREO O
O TO STEREO O
O INPUT CH ON O
*10 *10
O
O INPUT FADER
O INPUT MUTE O
O INPUT DCA O
*6
O
O
O
O
O
O EACH PARAMETER
O EACH PARAMETER
O
*8
Parameter Select button
*7
INPUT MATRIX ON
*7
INPUT MATRIX SEND
*7
INPUT MATRIX SEND
*7
INPUT MATRIX SEND
INPUT DELAY
INPUT DELAY
INPUT TO ST
INPUT TO MONO
INPUT TO ST
*5
*5
*5
*5
INPUT CH ON
INPUT FADER
*5
*5
*9
GLOBAL CH LINK
31
Channel
USER LEVEL
Library
*4
O
INPUT FADER/ON
*4
O
INPUT FADER/ON
*4
O
INPUT FADER/ON
*4
O
INPUT PROCESSING
INPUT PROCESSING O
INPUT PROCESSING O
INPUT PROCESSING O
INPUT PROCESSING O
INPUT FADER/ON O
INPUT PROCESSING O
INPUT PROCESSING O
INPUT PROCESSING O
INPUT PROCESSING O
INPUT FADER/ON O
INPUT FADER/ON O
MUTE GROUP ASSIGN O
DCA GROUP ASSIGN O
*6
STORE
O
Data List