Yamaha CL5 Referenzhandbuch Seite 269

 DELAYER.
One input, two output delay and early reflections effects in series.
Parameter Range
DELAY L 0.0-1000.0 ms Left channel delay time
DELAY R 0.0-1000.0 ms Right channel delay time
FB. DLY 0.0-1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN -99 to +99%
reverse-phase feedback)
HI. RATIO 0.1-1.0 High-frequency feedback ratio
Delay and early reflected delay balance
DLY.BAL 0-100%
(0% = all early reflected delay, 100% = all delay)
HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
S-Hall, L-Hall, Random,
TYPE Type of early reflection simulation
Revers, Plate, Spring
ROOMSIZE 0.1-20.0 Reflection spacing
LIVENESS 0-10 Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY 0.0-500.0 ms Initial delay before reverb begins
DIFF. 0-10 Diffusion (spread)
DENSITY 0-100% Reflection density
ER NUM. 1-19 Number of early reflections
SYNC OFF/ON Tempo parameter sync on/off
*1
NOTE L Used in conjunction with TEMPO to determine left channel DELAY
NOTE R Used in conjunction with TEMPO to determine right channel DELAY
*1
NOTE FB Used in conjunction with TEMPO to determine feedback DELAY
*1
*1.
 DELAY+REV
One input, two output delay and reverb effects in parallel.
Parameter Range
DELAY L 0.0-1000.0 ms Left channel delay time
DELAY R 0.0-1000.0 ms Right channel delay time
FB. DLY 0.0-1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN -99 to +99%
reverse-phase feedback)
DELAY HI 0.1-1.0 High-frequency feedback ratio
Delay and reverb balance
DLY/REV 0-100%
(0% = all delay, 100% = all reverb)
HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
REV TIME 0.3-99.0 s Reverb time
INI. DLY 0.0-500.0 ms Initial delay before reverb begins
REV HI 0.1-1.0 High-frequency reverb time ratio
DIFF. 0-10 Diffusion (spread)
DENSITY 0-100% Reverb density
SYNC OFF/ON Tempo parameter sync on/off
Description
(Maximum value depends on the tempo setting)
Description
16
Parameter Range
*1
NOTE L Used in conjunction with TEMPO to determine left channel DELAY
NOTE R Used in conjunction with TEMPO to determine right channel DELAY
*1
NOTE FB Used in conjunction with TEMPO to determine feedback DELAY
*1
*1.
 DELAYREV
One input, two output delay and reverb effects in series.
Parameter Range
DELAY L 0.0-1000.0 ms Left channel delay time
DELAY R 0.0-1000.0 ms Right channel delay time
FB. DLY 0.0-1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN -99 to +99%
reverse-phase feedback)
DELAY HI 0.1-1.0 High-frequency feedback ratio
Delay and delayed reverb balance
DLY.BAL 0-100%
(0% = all delayed reverb, 100% = all delay)
HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
REV TIME 0.3-99.0 s Reverb time
INI. DLY 0.0-500.0 ms Initial delay before reverb begins
REV HI 0.1-1.0 High-frequency reverb time ratio
DIFF. 0-10 Diffusion (spread)
DENSITY 0-100% Reverb density
SYNC OFF/ON Tempo parameter sync on/off
*1
NOTE L Used in conjunction with TEMPO to determine left channel DELAY
NOTE R *1 Used in conjunction with TEMPO to determine right channel DELAY
NOTE FB *1 Used in conjunction with TEMPO to determine feedback DELAY
*1.
Description
(Maximum value depends on the tempo setting)
Description
(Maximum value depends on the tempo setting)
Data List