Yamaha CL5 Referenzhandbuch Seite 263

 MOD. DELAY
One input, two output basic repeat delay with modulation.
Parameter Range
DELAY 0.0-2725.0 ms Delay time
FB. GAIN -99 to +99% Feedback gain
HI. RATIO 0.1-1.0 High-frequency feedback ratio
FREQ. 0.05-40.00 Hz Modulation speed
DEPTH 0-100% Modulation depth
WAVE Sine/Tri Modulation waveform
HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF/ON Tempo parameter sync on/off
*1
DLY.NOTE Used in conjunction with TEMPO to determine DELAY
*2
MOD.NOTE Used in conjunction with TEMPO to determine FREQ
*1.
*2.
 DELAY LCR
One input, two output 3-tap delay (left, center, right).
Parameter Range
DELAY L 0.0-2730.0 ms Left channel delay time
DELAY C 0.0-2730.0 ms Center channel delay time
DELAY R 0.0-2730.0 ms Right channel delay time
FB. DLY 0.0-2730.0 ms Feedback delay time
LEVEL L -100 to +100% Left channel delay level
LEVEL C -100 to +100% Center channel delay level
LEVEL R -100 to +100% Right channel delay level
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN -99 to +99%
reverse-phase feedback)
HI. RATIO 0.1-1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF/ON Tempo parameter sync on/off
*1
NOTE L Used in conjunction with TEMPO to determine left channel DELAY
NOTE C *1 Used in conjunction with TEMPO to determine center channel DELAY
NOTE R *1 Used in conjunction with TEMPO to determine right channel DELAY
NOTE FB *1 Used in conjunction with TEMPO to determine feedback DELAY
*1.
Description
(Maximum value depends on the tempo setting)
Description
(Maximum value depends on the tempo setting)
10
 ECHO
Two input, two output stereo delay with crossed feedback loop.
Parameter Range
DELAY L 0.0-1350.0 ms Left channel delay time
DELAY R 0.0-1350.0 ms Right channel delay time
FB.DLY L 0.0-1350.0 ms Left channel feedback delay time
FB.DLY R 0.0-1350.0 ms Right channel feedback delay time
Left channel feedback gain (plus values for normal-phase feedback, minus
FB. G L -99 to +99%
values for reverse-phase feedback)
Right channel feedback gain (plus values for normal-phase feedback,
FB. G R -99 to +99%
minus values for reverse-phase feedback)
Left to right channel feedback gain (plus values for normal-phase feedback,
LR FBG -99 to +99%
minus values for reverse-phase feedback)
Right to left channel feedback gain (plus values for normal-phase feedback,
RL FBG -99 to +99%
minus values for reverse-phase feedback)
HI. RATIO 0.1-1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF/ON Tempo parameter sync on/off
*1
NOTE L Used in conjunction with TEMPO to determine left channel DELAY
NOTE R *1 Used in conjunction with TEMPO to determine right channel DELAY
Used in conjunction with TEMPO to determine left channel feedback
NOTE FBL *1
DELAY
Used in conjunction with TEMPO to determine right channel feedback
NOTE FBR *1
DELAY
*1.
 CHORUS
Two input, two output chorus effect.
Parameter Range
FREQ. 0.05-40.00 Hz Modulation speed
AM DEPTH 0-100% Amplitude modulation depth
PM DEPTH 0-100% Pitch modulation depth
MOD. DLY 0.0-500.0 ms Modulation delay time
WAVE Sine, Tri Modulation waveform
SYNC OFF/ON Tempo parameter sync on/off
*1
NOTE Used in conjunction with TEMPO to determine FREQ
LSH F 21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G -12.0 to +12.0 dB Low shelving filter gain
EQ F 100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G -12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0-0.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz-16.0 kHz High shelving filter frequency
HSH G -12.0 to +12.0 dB High shelving filter gain
*1.
Description
(Maximum value depends on the tempo setting)
Description
Data List