ABL SLS4K40 Montageanleitung Und Bedienungsanleitung Seite 7

SLS4K40– Installation and User Guide
Installation and User Guide SLS4K40
Description
The light control SLS4K40 has been developed for switching and dimming of individual light circuits (channels) in
the residential of mobile homes and caravans.
It has four button inputs directly assigned to four output channels (T1 K1, T2 K2 etc.). Four single buttons
and/or a four-button-keyboard can be connected.
Through an additional button input a COMING-HOME-/ CENTRAL-OFF-Function is realized.
To avoid abrupt change in brightness, the light control SLS4K40 has soft start and soft stop.
To protect the battery the light control SLS4K40 provides stepwise automatic brightness limit and under voltage
lockout.
If no channel is turned on, the controller enters a power saving POWER-DOWN-Mode.
Warning signs and safety tips
Read the manual
Always read and follow the information in this manual
General warning
Ignoring these instructions can result in danger to life and limb or substantial property
damage
Safety instructions
•
Disregarding the instructions in this manual, or improper handling of the device can lead to serious injury,
death or substantial property damage.
•
The Light control SLS4K40 must be installed by a qualified electrician.
•
Electrical connections must be carried out by a qualified electrician in accordance with these instructions.
•
Implement electrical connections properly.
•
Disorders that affect the safety of persons or the device must be immediately repaired by qualified personnel.
•
The applicable accident prevention regulations, standards and guidelines must be followed.
•
Do not tamper with the electrical system or modify the device.
•
Never operate the device if cables or connections are worn, damaged or defective.
•
Do not perform maintenance on the unit when voltage is applied.
Seite 7
Doc. No. 03 0020 01_C