Setting Up; Wireless Connection; Initial Setting Of An Id For The Wireless Subwoofer; Setting An Id For The Wireless Subwoofer - LG BB4330A Benutzerhandbuch

Setting up

Wireless connection

LED indicator of wireless subwoofer
LED Color Operation
Yellow The wireless subwoofer is
receiving the signal of the
unit.
Yellow (blink) The wireless subwoofer is
trying to connect.
Red The Wireless subwoofer is in
standby mode.
Off (No display) The Wireless subwoofer is
turned off.
Initial setting of an ID for the
wireless subwoofer
1. Connect the power cord of the Wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
Setting an ID for the wireless
subwoofer
When the unit is manufactured, the ID is already
set. If interference occurs or you use a new wireless
subwoofer, an ID should be set again.
1. Press HOME ( ).
2. Use I / i to select the [Setup] and
press ENTER (b). The [Setup] menu appears.
3. Use U / u to select [AUDIO] option then press i
to move to the second level.
4. Use U / u to select the [Connect wireless
speakers] option then press ENTER (b) or i to
move to the third level.
The [Wireless Speaker Connection Guide]
appears.
5. Press PAIRING button on the subwoofer.
- If you see the yellow LED indicator light,
pairing was successful.
6. Use I / i to select the [Speaker test] and press
ENTER (b) for wireless speaker connection test.
,
Note
y If there is a strong electromagnetic wave
product nearby, interference may occur. Put
the unit (Wireless subwoofer and main unit)
away from there.
y If you operate main unit then wireless
subwoofer (rear speakers) sound within a
few seconds in standby mode.
y Set the distance between this unit and
subwoofer Receiver within 10 m (32 ft.).
y Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y It takes a few seconds (and may take longer)
for the Wireless Transmitter and subwoofer
to communicate with each other.
Connecting 15
2