Other Connections; Connecting To The Remote Control Jacks; Connecting The Power Cable - Yamaha BD-S1065 Bedienungsanleitung

■ Connecting to the REMOTE
CONTROL jacks
– You can transmit the remote control signals by
connecting to the REMOTE CONTROL (OUT/IN)
jacks.
– Firmly connect 3.5mm mini plug cables
(commercially available) to the REMOTE
CONTROL (OUT/IN) jacks (1 and 2, or 3 and
4).
– If your AV receiver is a Yamaha product and has the
capability to transmit SCENE control signals, you
can use the SCENE function.
Caution!
Be sure to turn off this Player and the
equipment before making any
connections.
This Player
OUT
ONENT
REMOTE CONTROL
P COAXIAL
B
P S VIDEO OPTICAL
R
VIDEO OUT DIGITAL OUT
NETWORK
To REMOTE
1
CONTROL
(OUT) jack
3.5mm mini plug
cable
(commercially
available)
To remote
2
control in
jack
REMOTE CONTROL IN
IR flasher or Yamaha
component
Hint
– For details about the SCENE function, refer to the
owner's manual supplied with your Yamaha AV
receiver.

Other Connections

IN
HDMI
USB
BD STORAGE/
SERVICE
To REMOTE
CONTROL (IN)
jack
3.5mm mini plug cable
(commercially available)
To remote
4
control out
jack
REMOTE CONTROL OUT
Infrared signal receiver
or Yamaha component
(such as AV receiver)
– You can connect a Yamaha component (such as
DVD player and CD player) corresponds with the
SCENE function to the REMOTE CONTROL
(OUT) jack of this unit.

■ Connecting the power cable

– Plug the supplied power cable into the AC IN
terminal on the rear of the Player. Then plug into AC
outlet.
AC IN
To AC outlet
Note
– TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH THE UN-INSULATED PARTS OF
ANY CABLES WHILE THE POWER CABLE IS
CONNECTED.
3
SURROUND
CENTER BACK SURROUND
L
R
SUBWOOFER
AUDIO OUT
To AC IN terminal
2
F
15
En