Careful Handling And Use Of Electrical Power Tools; Device-Specific Safety Instructions For Small Drill Kh3037 And Mains Adapter Kh3037 - Parkside PMGS 12 A1 Betriebsanleitung

f) Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep your
hair, clothing and gloves clear of mov-
ing parts. Loose clothing, jewellery or long
hair can become trapped in moving parts.
g) If vacuum dust extraction and collection
devices are fitted do not forget to check
that they are properly connected and
correctly used. The use of these devices
reduces the hazard presented by dust.
4. Careful handling and use
of electrical power tools
a) Do not overload the device. Always
use an electrical power tool that is
intended for the task you are under-
taking. By using the right electrical power
tool for the job you will work more safely and
achieve a better result.
b) Do not use an electrical power tool if
its switch is defective. An electrical power
tool that can no longer be switched on and off
is dangerous and must be repaired.
c) Pull the mains plug from the socket
before you make any adjustments to
the device, change accessories or when
the device is put away. This precaution is
intended to prevent you from unintentionally
starting the device.
d) When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone use
the device if he or she is not familiar
with it or has not read the instructions
and advice. Electrical power tools are dan-
gerous when they are used by inexperienced
people.
e) Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device. Many accidents have their origins
in poorly maintained electrical power tools.
General safety advice for electrical power tools
f) Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g) Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice, and
the stipulations drawn up for this par-
ticular type of device. In doing this, take
into account the working conditions
and the task in hand. The use of electrical
power tools for purposes other than those in-
tended can lead to dangerous situations.
Device-specific safety
instructions for small drill
KH3037 and mains adap-
ter KH3037-1
½
protective equipment: safety glasses
and protective gloves.
CAUTION! The tool continues to rotate
½
WARNING!
workpiece. Use clamps or a vice to grip the
workpiece firmly. This is much safer than holding
it in your hand.
½
WARNING!
self by placing your hands near or in
front of the device or the workpiece
surface. A slip can result in injury.
½
Avoid contact with moving sanding or
grinding tools.
½
make sure that nobody is placed in any danger
and that there are no inflammable materials
near the working area.
½
WARNING!
harmful / noxious dusts generated from machin-
ing represent a risk to the health of the person
When you use the drill /
grinder wear the following
after it has been switched off!
Avoid contact with rapidly rotating
drill / grinder components.
Securely support the
Never support your-
DANGER OF FIRE FROM FLYING
SPARKS! Abrading metal creates
flying sparks. For this reason, always
DUST HAZARD! Any
GB/IE 9