Product View - Conrad 75 17 16 Bedienungsanleitung

• For safety reasons, disconnect the wall power supply from the mains socket in
case of a thunderstorm.
• The camera and the mains adapter are intended for dry indoor use only.
• Never pour fluids onto electrical devices. This would cause a serious danger of
fire or electric shock.
• This camera uses and generates high frequency energy. If the device is not
installed and operated in accordance with these instructions, it may cause sig-
nal disturbances. If a wireless camera leads to interference in other devices,
attempt one or more of the following measures listed below, in order to restore
normal function:
- Change the position of the camera.
- Change the distance between the respective device and the radio camera Select
a different transmission channel.
• Maintenance, adjustments and repairs may only be carried out by a qualified spe-
cialist or a specialised repair shop.
• If the product is used in connection with other devices e.g. a router, the operating
instructions and safety instructions of the connected devices must also be
observed closely.
• For any unanswered questions please contact our customer service or other spe-
cialists.

5. Product View

(see fold-out page)
1) Aerial
2) "DEFAULT" button
If this button is pressed, all settings are reset
to default set tings.
3) "RESET" button
If the "RESET" button is pressed, the camera
is restarted.
4) Microphone
5) Camera lens
6) System LED
7) Camera mount thread
24
8) Photo sensor
9) IR-LEDs
10) "LAN/WLAN" slider
11) Interface for maintenance and repairs by
the manufacturer
12) RJ-45 connection socket
13) "10/100" LED
Is lit or flashes when transmitting data
14) "POWER" LED
Is lit when power supply is present
15) Connections for the power supply
DC IN 5V