Introduction; Intended Purpose; Equipment Components; Included Items - Parkside PAS 3.6 A1 Betriebsanleitung

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Risk of explosion!
n
Nom. no-load speed
0
V ~
Volt (AC)
mA
Milliamps / Amps / Amp-hours
A / Ah
Direct current
V
(Type of current and voltage)
Lithium cordless screwdriver
PAS 3.6 A1
©
Introduction
Before you use it for the first time, it is es-
sential that you make yourself fully familiar
with the functions of the appliance and
find out how to correctly handle electrically powered
tools. To do this, read the following operating instruc-
tions carefully. Retain these instructions for future
reference. Additionally, pass them on to whoever
might acquire the appliance at a future date.
©

Intended purpose

This device is intended for driving screws into wood,
plastic and metal. Use the appliance only as described
and only for the purposes indicated. The device is
not intended for commercial use. Any other uses, and
modifications to the appliance, are deemed to be
improper usage and may result in serious physical
injury. The manufacturer accepts no responsibility
for damage(s) resulting from improper usage.
6 GB/IE
Safety class II
Keep children away from electrical
power tools!
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
For indoor use only!
Check that the device, mains lead and
plug are in good condition!
Dispose packaging and appliance in
an environmentally-friendly way!
Do not dispose of rechargeable
batteries with your household refuse!
©

Equipment Components

Direction of rotation switch / lock
1
Direction indicator (clockwise)
2
Battery display
3
Direction indicator (anticlockwise)
4
Charging socket (device)
5
6 ON / OFF switch (LED lights)
7 ON / OFF switch
8 LED lights
Tool holder
9
Mains adapter
10
©

Included items

1 Lithium cordless screwdriver PAS 3.6 A1
1 Mains adapter PAS 3.6 A1 - 1
1 Carry case
26 Bits x 25 mm
2 Bits x 50 mm
1 Bit extension (see Fig. C)
1 Operating instructions