RUSTA 62551288 Gebrauchsanweisung Seite 4

ENG
ASSEMBLY
• The following tools are required for installation (not included):
Measuring tape
Wall brackets
1 Determine the height and mark a line on the wall using a spirit level. The line
marks the top edge of the wall brackets. It is essential that line is straight.
2
• Make sure that the awning's cord is positioned in the left side seen from the
front of the awning cassette. It is important that the wall bracket is positioned
on the wall so that the awning's cord can easily run through the hole in the
wall bracket.
• Fasten the wall brackets on the wall
with bolts that are suitable for your
wall (not included).
• Mount the awning cassette on the
wall brackets by hanging the awning
cassette on the upper part of the
respective wall bracket and then
pressing the cassette towards the wall
until an audible click is heard.
4
Philips screwdriver
Awning cassette
Level Drill