Herunterladen Inhalt Inhalt Diese Seite drucken

Switching The Led Light On And Off; Soldering Iron Stand; Third Hand; Soldering Sponge - Parkside 275637 Originalbetriebsanleitung

Löt-arbeitsstation
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Switching the LED light on and off
Switching on:
Plug the mains plug
socket and press the On/Off switch
"ON" position.
Switching off:
Set the On/Off switch
the illuminated magnifying glass
Always remove the plug
when not in use.
To protect the illuminated magnifying glass
fit the supplied magnifier cover
NOTE
Avoid touching the magnifying glass with
your fingernails or other sharp objects.

Soldering iron stand

NOTE
During breaks in work, the soldering iron
must be placed in the soldering iron stand
Use only the soldering iron stand or another
fireproof surface when putting down the
soldering iron.

Third hand

CAUTION! RISK OF BURNS!
The crocodile clips
during use.
Fold the third hand
Turn the crocodile clips
tion.
Clamp the workpiece between the two crocodile
clips.
PLLL 16 A2
into an appropriate wall
to the
to "OFF" to turn off
.
from the socket
,
.
can get very hot
upwards.
in the desired direc-

Soldering sponge

CAUTION!
The hot soldering tip
contact with a dry soldering sponge
Otherwise, the soldering sponge can be
damaged.
NOTE
The soldering sponge is used to clean the
soldering tip.
Dampen the soldering sponge before use.

Fitting the spindle roll

Select the correct diameter of spindle roll
for the solder roll that you are using.
Place the spindle roll on the solder coil mount
and guide the solder wire through one of the
three holes in the solder guide
.
must never come into
.
.
GB
 7

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Plll 16 a2

Inhaltsverzeichnis