Pruner Attachment (Option, Article Number 84 66 10)
For this machine a pruner Attachment is available under the Article Number
84 66 10.
When using the pruner attachment please also notice the following safety
notes:
Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
Keep the tool out of reach of children. It is not a toy.
Only use this unit according to this instruction manual and for the intended
use. The unit has not been designed for continuous, professional use.
Persons with limited physical, sensorial or mental abilities are not allowed
to use the unit, unless they are supervised and briefed for their safety by a
qualified person.
Never direct the power tool towards people or animals.
Protect the unit from humidity and extreme temperatures. Do not allow
water or any other liquids to enter the unit.
Cutting accessory contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an electric shock.
Keep hands away from the sawing range. Do not reach under the
workpiece. Contact with the saw blade can lead to injuries.
Apply the tool to the workpiece only when switched on. Otherwise there is
danger of kickback when the cutting tool jams in the workpiece.
When sawing, the pivoting shoe must always faces against the workpiece.
The saw blade can become wedged and lead to loss of control over the
tool.
When the cut is completed, switch off the tool and then pull the saw blade
out of the cut only after it has come to a standstill. This way you can avoid
kickback and can place down the tool securely.
Use only sharp, flawless saw blades. Bent or blunt saw blades can break or
cause kickback.
Do not slow down the saw blade by applying side pressure after switching
off. The saw blade can be damaged, break or cause kickback.
The Pruner Attachment (Option)
34