Using the Wheel Assy
1. Press the wheel assy in the grass
and hedge shears until the assy
locks audible. On both sides of the
housing you will find two notches.
Make sure the wheel assy locks in
these notches.
2. Use the wheel assy when trimming
grass over the ground. Hold the
handle of the grass and hedge
shears firmly in your hand and do
not force the grass and hedge
shears while trimming.
3. To remove the wheel assy, hold the handle of the grass and hedge shears
firmly in one hand and jerky pull the wheel assy out of the unit.
Using the Universal Handle and Wheel Assy
1. Remove the battery (1) from the universal handle.
2. To extend the universal handle, release the lever (10). Pull out the
extension pole (11) up to the desired length and close the release lever
(10) again.
3. Insert the grass and hedge shears into the universal handle.
Operation
10
11
32
1
1