Inhaltsverzeichnis
Werbung
3. To re-attach the gear cover (6) first arrange the locking pins at the bottom
side of the gear cover into the provided notches on the unit. Slide the gear
cover in direction to the blades until the gear cover locks visibly and
audibly with the housing. For inserting and removing the blade for hedges
and bushes, proceed in similar way.
Angle Adjustment
The handle of the grass and hedge shears can be tilt to totally 6 angle
positions (incl. 0° position).
Hold the unit on the handle and press the PUSH button inwards. Tilt down or
lift up the handle according to the working position you need for the respective
application.
Operation
press PUSH
Button
31
Lift up or tilt
down the Handle
Werbung
Inhaltsverzeichnis
