Diagnosis Mode - Yamaha HAIBIKE SDURO HardSeven RC 2016 Originalbetriebsanleitung

English
7. INSTRUMENT AND CONTROL FUNCTIONS
76
3. When the "hour" on the clock begins to flash, release the switches.
4. Use the assist mode switches (up & down) to set the "hour".
5. Press the function select switch, and the "minutes" on the clock will begin to flash.
6. Use the assist mode switches (up & down) to set the "hour".
7. Press the function select switch, and the distance (km or mile) and speed (km/h or MPH)
will begin to flash.
8. Use the assist mode switches (up & down) to switch between "km & km/h" and "mile & MPH".
9. Press the power switch. The settings are saved and this function is exited.

Diagnosis mode


The e-Bike Systems are equipped with a diagnosis mode. When you turn on the power, if there
is a malfunction or fault in the e-Bike Systems, the systems notify you of the fault by flashing the
assist mode indicator and the battery capacity indicator alternately, and displaying "Er" in the
speedometer. See "TROUBLESHOOTING" regarding symptoms and remedies for
abnormal displays and abnormal flashing.
If a fault is displayed, have your bicycle inspected by a dealer as soon as possible.