Pioneer N-50AE Bedienungsanleitung Seite 29

> Before Start > Part Names
0 You can make Wi-Fi connection settings using a web browser on a computer. For details,
refer to "Web Setup" ( P29).
∫ DHCP
"On" (Default Value): Auto configuration by DHCP
"Off": Manual configuration without DHCP
If selecting "Off", you must set "IP Address", "Subnet Mask", "Gateway", and "DNS Server"
manually.
∫ IP Address
Displays/Sets the IP address.
∫ Subnet Mask
Displays/Sets the subnet mask.
∫ Gateway
Displays/Sets the gateway.
∫ DNS Server
Displays/Sets the primary DNS server.
∫ Proxy URL
Displays/Sets the proxy server URL.
∫ Proxy Port
Displays/Sets the proxy server port number when you enter "Proxy URL".
∫ Friendly Name
Change the device name for this unit which is shown on other devices connected to the
network to an easily recognized name. You can input up to 31 characters. For details on how
to enter text, refer to "Entering text" (
∫ AirPlay Password
You can set a password of up to 31 characters so that only registered users can use AirPlay.
For details on how to enter text, refer to "Entering text" (
ENTER.
28
> Install > Initial Setup
P25). After finishing input, press ENTER.
P25). After finishing input, press
> Playback
Supplementary information |
∫ Network Check
You can check the network connection.
Option Setting
∫ Power Off Setting
Auto Standby This setting places the unit on standby automatically after 20
minutes of inactivity without any audio input.
"On" (Default Value): The unit will automatically enter standby
mode.
"Off": The unit will not automatically enter standby mode.
Network Standby When this feature is turned "On", you can turn on the power of the unit
via the network using an application that can control this unit.
0 When you have selected "On (USB Power)" and this unit is on
standby, you can use a computer connected to the same
network as this unit to access an HDD connected to the USB
port on the rear of the main unit.
0 If either "On" (default setting) or "On (USB Power)" is selected,
power consumption during standby becomes larger than
normal.
0 When the connection to the network is lost, "Network Standby"
may be disabled to reduce power consumption.
∫ Digital Filter
"Slow": Soft and fluid sound
"Sharp" (Default Value): Sound with more structure and firmness
"Short": Sound that starts quick and seems to move forward "Short"
∫ Storage
Information The file system, available capacity, and total capacity of the HDD
connected to the USB port on the rear of the main unit is displayed.
Advanced Setup | Others
E
N