Maintenance, Cleaning And Storing; Changing The Carbon Brushes - Westfalia 84 38 60 Original Bedienungsanleitung

Maintenance, Cleaning and Storing

 To avoid injury, always pull the power plug before maintaining, cleaning the
metal cutting saw or changing the cut-off disc. Do not disassemble the
machine and do not try to repair it yourself. In the case of questions or
problems please turn to our customer support department.
 Thoroughly clean the metal cutting saw after each use.
 Oil all moving and rotating parts frequently resp. when using the metal
cutting saw excessively.
 Before each use, check the metal cutting saw. Check the safety hood, the
power switches, and the power cord.
 Check for loose screws, loose connections, broken parts and all other
factors, which might interfere with safe operation. Turn the machine off
immediately if an unusual sound is noticed or unusual vibrations occur.
 If the machine shows any kind of damage, do not continue using it but have
it repaired by a professional or turn to our customer support department.
 Keep the metal cutting saw clean, dry and free from grease and oil.
 Store the metal cutting saw indoors in a dry place that is protected from dirt
and extreme temperatures.

Changing the Carbon Brushes

Remove and check the carbon brushes regularly. Replace when they wear
down to the limit mark. Keep the carbon brushes clean and free to slip in the
holders. Both carbon brushes should be replaced at the same time. Use only
identical carbon brushes.
Have the carbon brushes only replaced by an expert or contact our customer
service.
Maintenance
22