Switching Off; Using The Sandblasting Gun; Cleaning - Parkside IAN 73787 Bedienungs- Und Sicherheitshinweise

Operation / Cleaning / Service

Switching off:

R elease the trigger
A fter you finish work, disconnect the device from the compressed
air source.
NotE: First disconnect the hose from the compressed
air source and only then disconnect the compressed
air supply hose from the device. This will ensure that the
compressed air supply hose does not wave around in an uncon-
trolled manner.

Cleaning

Q
the device from the compressed air source before you clean or
maintain it.
C lean the sandblasting gun
after you finish working. Blow out the sandblasting gun
the blast medium container
S tore the sandblasting gun
Service
Q
only by qualified specialist personnel using original
manufacturer parts only. This will ensure that your sandblast-
ing gun remains safe to use.
36 GB
to stop operating the sandblasting gun
2
DANGER oF INJURY! Always disconnect
and blast medium container
1
with compressed air.
4
in a dry, enclosed room.
1
Have your sandblasting gun repaired
.
1
4
and
1