Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAKE/EDIT CHASE
1.
MAKE A CHASE.
I.
Choose any chase #1-6 to be programmed.
II.
Select the desired scene from any bank.
III.
Press the MIDI/ADD button. LCD display and all LEDs will flash.
NOTE: Scenes are to run in the order that they are programmed into the chase.
IV.
Repeat step II and III as often as you want until the chase is complete. You can program up to 240
scenes in one chase.
2.
COPY A BANK TO A CHASE
Use BANK ▲ (or ▼) button to select a bank (A) which you want to copy.
I.
II.
Select the chase into which you want to copy by pressing CHASE button #1-6.
III.
Press and hold MUSIC/BANK COPY button + MIDI/ADD button together. After LCD display and all
LEDs flash, then release buttons.
3.
ADD A STEP IN A CHASE
For example, adding a new step after step10 in chase4 (chase4 should have step10 set already)should be operated as follows:
I.
Select chase by pressing CHASE button 4. The LCD will display the current step by means of chase#
+ scene# +bank# ( like "4101", the scene1 in bank1, and current chase# is chase4).
II.
Press TAP SYNC/DISPLAY button, the LCD shows the current chase# + step# (like "4030", the thirtieth
step of chase4).
Use BANK button ▲ (or ▼) to scroll through chase to the step10 (LCD displays as "4010")
III.
IV.
Press MIDI/ADD button. The display will show "4011" (step11 in chase4).
V.
Press TAP SYNC/DISPLAY button one more time, the LCD will resume to means of chase# + scene# +
bank# (like "4101"). Choose the scene you want to activate in this step11 by using BANK ▲ (or ▼) button and SCENE
button.
VI.
Press MIDI/ADD button, after the LCD display and all LEDs flash, the step11 is added into chase, while
the previous step11 is current step12, previous step12 is current step13, and son so.
4.
DELETE A STEP IN A CHASE
For example, deleting step10 in chase4 (chase4 should have step10 set already) should be operated as follows:
I.
Select chase by pressing CHASE button 4. The LCD will display the current step by means of chase#
+ scene# +bank# ( like "4101", the scene1 in bank1, and current chase# is chase4).
II.
Press TAP SYNC/DISPLAY button, the LCD shows the current chase# + step# (like "4030", the thirtieth
step of chase4).
Use BANK▲ (or ▼) button to scroll through chase to the step10 (LCD displays as "4010")
III.
IV.
Press AUTO/DEL button, after the LCD display and all LEDs flash, the step10 is deleted, while the
previous step11 is current step10, previous step12 is current step11, and son so.
5.
DELETE A CHASE
I.
While press and hold AUTO/DEL button, press the CHASE button of chase you want to delete.
II.
After the LCD display and all LEDs flash, the chase is deleted.
6.
DELETE ALL CHASES (All scenes still exist)
While press BANK ▼ button + AUTO/DEL button together, turn power off. Then turn on the power again. After LCD display and all
LEDs flash, release buttons.
For the following operations, there is no need to enter PROGRAM mode first. Just follow up the instructions below step by step.
9
Werbung
