Lightmaxx LIG0012880-000 Bedienungsanleitung Seite 8

EDIT SCANNER/SCENE/BANK
1. COPY A SCANNER
I. If a scanner (A) is set, press and hold the corresponding SCANNER (A) button (LED should lit).
II. At the same time, press another SCANNER (B) button (LED should lit), then release all buttons.
2. POGRAM A SCENE
I. Press a SCANNER button to select DMX fixture(s). Each scanner is assigned with 16 channels. You
may also group several DMX fixtures in one scanner.
II. Adjust channel sliders to set desired output level for each channel. Use Page Select button to switch
between Page A (contains CH1-CH8) and Page B (contains CH9-CH16) to make settings.
III. Then exit setting of this scanner by press the SCANNER button again (the LED will extinguish).
IV. Repeat step I, II, III to set remaining fixtures assigned in other scanners.
Select desired bank using BANK ▲ (or ▼) button.
V.
VI. While press and hold MIDI/ADD button, press SCENE button of the scene in which to store the channel
settings, the LCD display and all LEDS will flash. Then release buttons.
3. EDIT A SCENE
Use BANK ▲ (or ▼) button to select a bank in which the desired scene is stored.
I.
II. Press the corresponding SCENE button of the scene to be edited.
III. Edit level settings in the scene to meet the requirements you need. (follow up PROGRAM A SCENE).
4. COPY A SCENE
Use BANK ▲ (or ▼)button to select a bank (A) in which the desired scene (B) is stored.
I.
II. Press the corresponding SCENE button of the scene (B) to be copied.
III. Use BANK ▲ (or ▼)button to select another bank (C) to copy scene (B) into.
IV. While press and hold MIDI/ADD button, press the SCENE button of scene (D) as you like. Release
buttons and the display and LCD display and all LEDS will flash. Now, scene (D) has the exact same level settings as scene (B)
except that scene (D) is stored in bank (C).
5. DELETE A SCENE (All level settings incorporated with this scene will be set to 0)
Use BANK ▲ (or ▼) button to select a bank in which the desired scene is stored.
I.
II. While Press and hold AUTO/DEL button, press the corresponding SCENE button of which scene to be
deleted. When LCD display and all LEDs flash, release buttons.
6. ERASE ALL SCENES (All level settings stored in the device will be set to 0)
While press PROGRAM button and BANK ▼ button together, turning power off. Then turn on the power again. After the LCD
display and LEDs flash, release buttons.
7. COPY A BANK
Use BANK ▲ (or ▼) button to select a bank (A) which you want to copy.
I.
II. Press MIDI/ADD button.
Select another bank (B) to copy into by using BANK ▲ (or ▼) button.
III.
IV. Press MUSIC/BANK COPY button, the LCD display and all LEDs will flash.
8. DELETE A BANK
Use BANK ▲ (or ▼) button to select a bank which you want to delete.
I.
II. Press AUTO/DEL button and MUSIC/BANK COPY button together, after the LCD display and all LEDs flash then release
buttons.
8