Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. SCENE buttons(1-8): Press to select or deselect a scene.
3. CHANNEL sliders(1-8): Adjust the channel output level from 0 to 255, or intensity from 0% to 100%.
4. Page Select button: Press to switch between pageA(contains CH1-CH8) and pageB(contains CH9-CH16).
5. SPEED slider: Adjust running speed of scenes(or steps) in range of 0.1sec to 10minutes/scene (or step).
6. FADE TIME slider: Adjust fade time in range of 0-30s. Fade time is the amount of time assigned to behave the changing
7. LCD display:
a) First digit displays the current chase#.
b) Second digit displays the current scene's number.
c) Third and fourth digits display the current bank's number.
d) The last 3 digits may also display the value of channel output level or number of step or fade time value or
speed value in specific mode.
e) In AUTO RUN mode, a lit LED (next to "Auto Trigger") indicates the operation.
f)
In MUSIC RUN mode, a lit LED (next to "Music Trigger") indicates the operation.
g) In BLACKOUT mode, a blinking LED (next to "Blackout") indicates the operation.
h) In PROGRAM mode, a blinking LED (next to "PROG") indicates the operation.
8. BANK ▲ (or ▼) button: Scroll through Bank1 to Bank30 at one bank per pressing.
9. Chase button: Press to select or deselect a chase.
10.Program button: Press and hold Program button till corresponding LED blinks will enter PROGRAM mode. Press and hold
PROGRAM button till corresponding LED extinguishes will exit PROGRAM mode.
11.Midi/Add button: Confirm key to save scenes or fill by Chaser
12.Auto/Del button: Activate/Exit AUTO RUN mode. Or execute other functions by proper operation.
13.Music/Bank-copy: Activate/exit MUSIC RUN mode. Or execute other functions by proper operation.
14.Tapsync/Display button: In AUTO RUN mode, set the running speed of scene. Or change value type in LCD display in specific
15.BLACKOUT button: Turn off all channel outputs.
16.DMX POLARITY SELECT: Select the polarity of DMX output.
17.DMX OUT: connect to the first fixture controlled and output DMX control signal.
18.DC INPUT: Attach to the AC-DC adapter.
IMPORTANT
For operation of EDIT SCANNER/SCENE/BANK and MAKE/EDIT CHASE, first enter PROGRAM mode by pressing and hold Program
button till appropriate LED blinks, which indicates it is in PROGRAM mode. To store the setting and exit PROGRAM mode, press
and hold Program button till the appropriate LED extinguishes.
For easy programming, SPEED and FADE TIME should be set to minimum levels. For SPEED slider, it should be all the way up. For
FADE TIME slider, it should be all the way down.
between two scenes(or steps). Such as the time it takes for a light beam to move from one position
to another position, or for dimmer to fade in or fade out.
mode.
7
Werbung
