eQ-3 MAX! Bedienungsanleitung Seite 86

select each digit one after the other. Once you have selec-
ted the correct digits, press the Boost button to confirm.
• After you have selected the correct code, „On" or „OFF"
is displayed. Select „OFF" with the handwheel and press
the Boost button to confirm.
• The display returns to normal. The
the advanced operating lock is deactivated.
• If you enter an incorrect code, the display switches back
to normal immediately. The advanced operating lock con-
tinues to be activated.
If you have taugh-in several MAX! Radiator Thermo-
stat + the advanced operating lock has to be activa-
ted and deactivated manually on each device.
Changing the code:
• Press and hold down the Auto/menu button for more than
3 seconds. Use the handwheel to select „Loc" from the
menu and click the Boost button to confirm.
• Enter the code stored in the memory as described abo-
ve. „On" or „OFF" is displayed.
• Press the Auto/Manu button again.
• Use the handwheel to change each of the four digits in
the code one after the other. Press the Boost button af-
ter selecting each digit. The new code and „On" or „OFF"
are now displayed.
• Once you have selected all four digits, press the Boost
button. Your code has now changed and the display re-
turns to the normal view.
If you forget the code, the full functional scope of the
MAX! Radiator Thermostat + can only be restored by
performing a factory reset or via the MAX! Cube (see
Chap. 14.10 Reset (rES)).
86
-symbol is off and