Removing The Old Dial - eQ-3 MAX! Bedienungsanleitung

By means of the adapters in the delivery, the device can be
installed on radiator valves of type Danfoss RA, Danfoss
RAV and Danfoss RAVL.
Rotate the thermostat dial to the maximum value (A) (an-
ti-clockwise). The thermostat dial then no longer presses
against the valve spindle, making it easier to remove.
There are different ways of fixing the position of the ther-
mostat dial:
• Union nut: Unscrew the union nut in an anticlockwise di-
rection (B). Then you can remove the thermostat head (C).
• Snap-on fastenings: Thermostat dials that have been
attached using this method can be easily released by gi-
ving the lock/union nut a slight turn in the anticlockwise
direction (B). The thermostat dial can then be removed (C).
• Compression fittings: The thermostat dial is held in
place by a mounting ring which is held together with a
screw. Slacken this screw and remove the thermostat
dial from the valve (C).
• Screwed on with a grub screw: Slacken the grub screw
and remove the thermostat dial (C).
56

7.1 Removing the old dial