eQ-3 MAX! Bedienungsanleitung Seite 116

starts to flash.
• Release the teach-in button; the factory settings are
restored.
The LED's flashing sequences have different meanings:
Flashing
sequence
1x flash
2x flashes
3x flashes
10. Information about radio operation
Radio transmission is performed on a non-exclusive
transmission path, which means that there is a possibility
of interference occurring. Interference can also be caused
by switching operations, electrical motors or defective
electrical devices.
The range of transmission within buildings can differ
greatly from that available in the open air. Besides the
transmitting power and the reception characteristics of the
receiver, environmental factors such as humidity in the vi-
cinity have an important role to play, as do on-site struc-
24
9. LED flashing sequences and
transmission behaviour
Meaning
Window open/closed, radio command
sent successfully
Duty cycle has been exceeded. The
longest period to wait before sending
again would be an hour.
Error message: wireless command not
sent successfully