eQ-3 MAX! Bedienungsanleitung Seite 110

• The magnet (2) can be mounted on either side of the
electronic unit (1). Installation must be in parallel with a
maximum spacing of 8 mm.
• The magnet (2) must be centre-aligned with the elect-
ronic unit (1).
• The magnet (2) and electronic unit (1) must be attached
at the same level (or as close to the same level as possib-
le) within the designated area. You might need to use the
spacers supplied for the magnets (2) to do this.
18
1)
2)
max. 8 mm
1)
2)