Disposal And Recycling; Storage - EINHELL 42.506.70 Originalbetriebsanleitung

8.1 Cleaning
•
The drill is maintenance-free to a large extent.
Keep the equipment clean. Pull the power
plug before doing any cleaning and mainte-
nance work on the appliance. Do not use any
harsh, abrasive solvents to clean. Ensure that
no liquid seeps into the equipment. Regrease
all bare parts when the work is finished. The
drill pillar, blank parts of the column, and the
drill table especially should be regreased at
regular intervals. Use a standard, acid-free
lubricating grease to do this.
Danger: Do not use your household trash
can as a receptacle for oil and grease-soaked
cleaning rags or grease and oil sludge. Dis-
pose of these toxic materials in an environ-
mentally-friendly fashion. Regularly check
and clean the ventilation holes. Store the
equipment in a dry room. Should the equip-
ment become damaged, do not try to repair
it yourself. Leave this work to the hands of a
qualifi ed electrical technician.
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
cleaning agents or solvents; these could at-
tack the plastic parts of the equipment. Ensu-
re that no water can seep into the device. The
ingress of water into an electric tool increases
the risk of an electric shock.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering spare parts and accessories
Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
Tip! For good results we
recommend high-quality ac-
cessories from
www.kwb.eu
welcome@kwb.eu
Anl_TC-BD_350_SPK9.indb 22 Anl_TC-BD_350_SPK9.indb 22
GB

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.

10. Storage

Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
!
- 22 -
13.06.2017 13:22:00 13.06.2017 13:22:00