Layout And Items Supplied - Parkside PKS 1700 B2 Originalbetriebsanleitung

•
Do not use any low-powered machines for
heavy duty work.
•
Be careful when working in vertical mode.
•
Caution: Take extra care when making double
miter cuts!
Do not lose these safety instructions

3. Layout and items supplied

3.1 Layout
1. Handle
2. ON/OFF switch
3. Release lever
4. Saw shaft lock
5. Machine head
6. Movable blade guard
7. Saw blade
8. Clamping device
9. Workpiece support
10. Locking screw for workpiece support
1 1. Table insert
12. Latched position lever
13. Locking grip
14. Pointer
15. Scale
16. Turntable
17. Fixed saw table
18. Additional stability bar
19. Stop rail
20. Scale
21. Pointer
22. Sawdust bag
23. Locking screw
24. Locking screw for drag guide
25. Fastening bolt
26. Drag guide
27. Knurled screw for cutting depth limiter
28. Stop for cutting depth limiter
29. Adjustment screw (90°)
30. Adjustment screw (45°)
31. Flange bolt
32. Outer fl ange
33. Laser
34. ON/OFF switch for laser
35. Battery compartment
36. Battery compartment cover
Anl_4300686.indb 47 Anl_4300686.indb 47
GB
37. Screw
38. Inner fl ange
c) Allen key, 6 mm
d) Counternut
y) 45° stop angle (not supplied)
z) 90° stop angle (not supplied)
3.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material
are not toys. Do not let children play with
plastic bags, foils or small parts. There is
a danger of swallowing or suffocating!
•
Drag, crosscut and miter Saw
•
2 x Clamping device (8)
•
2 x Workpiece support (9)
•
Sawdust bag (22)
•
Allen key, 5 mm
•
Allen key, 6 mm (c)
•
Additional stability bar (18)
•
2 x Battery (1.5 V LR03)
- 47 -
10.10.12 18:45 10.10.12 18:45