Schwaiger ZHS 14 Bedienungsanleitung Seite 12

Siren triggering mode (submenu / Parameter Number 1, Size 1)
Sets the tamper triggering mode when removed from the holder
Value Description
0 The Siren triggers automatically when it's removed from the holder. Must be
turned off, using the button or from the controller (Default)
1 The Siren triggers automatically when it's removed from the holder and turns
off, when placed back on the holder
2 Siren doesn't trigger at all, when removed from the holder. Service Mode
Temperature adjustments (Parameter Number 2, Size 1)
Temperature correction. For positive value 10 = 1 °C, for negative value x = 256 - (T°C * 10).
Example, if need shift -2.6°C, value calculate: 256 - (2.6 * 10) = 230.
Value Description
0 Disabled (Default)
1-127 In 0.1°C (Default 0)
128-255 -0.1°C
Send unsolicited temperature report (Parameter Number 3, Size 1)
Threshold temperature to send unsolicited report. 10 = 1°C
Value Description
0-255 In 0.1°C (Default 10)
Send unsolicited temperature report after N wake up (Parameter Number 4, Size 2)
If the value is set, after N wake up number (measurement is every 4 minutes) the tempera-
ture report will be sent. By default it's 15 = every 1 hour
Value Description
0 Disabled
1 – 65535 Each N
Switch mode: siren only, flash only, flash + siren (submenu / Parameter Number 5,
Size 1)
Value Description
0 Siren only
1 Flash only
2 Flash + Siren (Default)
12
wake up time (Default 15)
th