Inhaltsverzeichnis
Werbung
ABB-Welcome
Installation dimensions for slotted screw holes
60 mm
1.
The bottom of the device has screw holes for fastening to the wall according to the
dimension above.
2.
In addition, the bottom of the device can be affixed to the existing flush-mounted
box. The dimension of the compatible flush-mounted box is shown above.
Wiring
Affix the bottom of the device and connect it according to illustration above.The
insulated section of the cable end must not be longer than 10 mm.
Settings
Set addresses of the preferred outdoor stations and the address of the indoor station on
the jumper. (See Chapter 4.3, Adjusting the device.)
|
60 mm
79 mm
— 14 —
Werbung
Inhaltsverzeichnis
