Changing The Settings When Connecting An Hdmi Or Component Cable - Yamaha PianoCraft MCR-940 Bedienungsanleitung

CHANGING THE SETTINGS WHEN CONNECTING AN HDMI OR
You can change the settings when an HDMI or a component cable is connected using the keys on the BD player. Also see
page 33.
Notes
• Even in Pure Direct mode, you can display and change settings on the front panel display of the BD player.
• You cannot change the settings during playback. Change the settings after stopping playback.
DISC
OPTION
A B
TOP MENU/TITLE LIST
ENTER
EXIT
EXIT
1
Press DISC to select an input source, and
press OPTION.
"VIDEO RESET" appears on the front panel display
of the BD player.
2
Press / to select "VIDEO RESET" or
"HDMI <-> COMP".
VIDEO RESET
Restore the resolution of "Component Video Out"
(☞p.33) or "HDMI Video Out" (☞p.33) to the
factory default setting.
HDMI <-> COMP
Set the video output priority to HDMI or Component.
For details, see "Video Out Select" (☞p.33).
3
Press ENTER to confirm the setting.
">> DONE <<" is displayed.
To cancel the setting operation
Press OPTION, EXIT or RETURN.
COMPONENT CABLE
C D
POP UP MENU
,
RETURN
41
En