Dynamic Range Control - Yamaha PianoCraft MCR-940 Bedienungsanleitung

SETTINGS OF THE BD PLAYER
Settings on this Player
Video Out HDMI Video
Select Out
Auto
1080p
HDMI 1080i
720p
480p/576p
Settings on this Player
Video Out Component
Select Video Out
*1
1080i
*1
720p
Component
480p/576p
480i/576i
*1 Some discs prohibit high definition video output from
COMPONENT jacks. In this case, video resolution is
converted to 480p/576p (when "Video Out Select" is set to
"Component") or 480i/576i (when "Video Out Select" is set
to "HDMI").
*2 No video output when 1080p signal is output from the HDMI
jack.
*3 CVBS Out means the video output signal from the VIDEO
jack.
Note
If your TV is not compatible with the selected resolution, images
may not be displayed correctly.
y
You can also switch between "HDMI" and "Component" by
using "HDMI <-> COMP" (☞p.41).
■ Secondary Audio
You can turn on and off secondary audio for the picture in
picture or audio commentaries.
On*, Off
y
When you set "Secondary Audio" to "Off", this unit does not
output the clicking sound on the menu.
Select "Off" to enjoy high quality BD sound via the HDMI jack.
■ Audio Out
You can set the audio output suitable for your playback
environment.
HDMI Output: Outputs an audio signal via the HDMI jack.
Digital Output: Output an audio signal via the DIGITAL OUT
(OPTICAL) jack.
2ch Audio
Outputs an audio signal via the AUDIO OUT
Output*: jacks.
34
En
Output Resolution
Component
*3
CVBS Out
Out
*1 *2
480i/576i
No Output No Output
*1
1080i 480i/576i
*1
720p 480i/576i
*1
480p/576p 480i/576i
Output Resolution
*3
HDMI Out CVBS Out
*1
1080i 480i/576i
*1
720p 480i/576i
480p/576p 480i/576i
480i/576i 480i/576i
"HDMI Output" options
When you set "Audio Out" to "HDMI Output", select one
of the following options.
Bitstream: Outputs a bitstream audio signal.
Select this option when connecting an HDMI
component with a built-in decoder for
DOLBY DIGITAL, etc.
PCM* Outputs a Linear PCM audio signal.
(Surround):
Audio signals recorded in different format,
such as DOLBY DIGITAL and DTS, are
decoded to Linear PCM and output.
Note
When "Secondary Audio" is set to "On", the "HDMI Output"
option is automatically set to "PCM".
"Digital Output" options
When you set "Audio Out" to "Digital Output", select one
of the following options.
Bitstream:
Outputs a bitstream audio signal.
Select this option when connecting a surround
component with a built-in decoder for
DOLBY DIGITAL, etc.
PCM*: Outputs a PCM 2-channel audio signal.
Audio signals recorded in different format are
converted to PCM 2-channel audio signals
and output.
Select this option when connecting a 2-
channel stereo audio component.

■ Dynamic Range Control

You can adjust the dynamic range so that sound is output
at average volume. If you cannot hear dialog clearly,
change the setting of this menu.
Normal: Outputs sound in the same dynamic range as
the original sound.
Shift: Adjusts the dynamic range of Dolby Digital
audio so that dialog is clearly heard.
If sound is abnormal, set this to "Normal".
Auto*: Automatically adjusts the dynamic range of
Dolby TrueHD audio.
Note
Turn the volume down prior to changing this setting; otherwise,
loud sound may be output from speakers or an excessive
electrical load is applied to them.