To avoid wrong detection results do not fix the PIR module close to
any kind of heating sources.
The motion detector works properly if it's supplied with 12 VDC. Do
not operate it with AC-Voltage, the item can be destroyed.
Ω
Specifications
Supply-Voltage (range) . . . . . . . . . : 12 VDC (> 10, < 14)
Operating-/stand-by-current. . . . . : 0,6 mA / 0,4 mA
Detection-angle. . . . . . . . . . . . . . . : 60° vertical, 100° horizontal
Detection-distance . . . . . . . . . . . . : max. 5 m
Output duration. . . . . . . . . . . . . . . : > 0,5 s
Output voltage (open-collector) . . : 0,2 V
dimensions (lxbxh) . . . . . . . . . . . . : 27 x 27 x 18 mm
(fresnel-) Lens diameter . . . . . . . . : 24 mm
6