H Andling And Maintenance; Fuse Replacement - Maxwell Digital Multimeters 25304 Bedienungsanleitung

EN
User Manual
H
andling and
maintenance
Handling
Keep the multimeter dry. If it is exposed to
•
moisture wipe it dry immediately. Liquids may
corrode the circuits.
The multimeter must only be stored and used
•
at normal temperatures. High temperatures
decrease the lifetime of electronic devices,
damage batteries and distort and damage plastic
parts.
Handle the multimeter with care. A drop may
•
damage the circuits and the case which may
cause incorrect operation.
Protect the multimeter from dust and other dirt
•
that may cause premature abrasion.
Clean the multimeter with a wet cloth. Do not
•
use chemicals, solvents or strong detergents for
cleaning.
Maintenance
Battery replacement(1 X 9V)
•
Disconnect any external circuits from the
•
device. Turn the multimeter off and remove
the measuring wires from the connectors.
Unscrew the screw at the bottom and remove
•
the bottom cover.
Remove the depleted battery and replace it to
•
a new one of the same type.
F
Use replacement
Disconnect any external circuits from the
•
device. Turn the multimeter off and remove
the measuring wires from the connectors.
Unscrew the screw at the bottom and remove
•
the bottom cover.
Replace the melted fuse to one of the same
•
type and value (5x20 mm, 200 mA / 250 V „F"
type).