• Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the RISK OF ELECTRIC SHOCK DO NOT OPEN product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Seite 3
This equipment generates/uses radio frequencies and, if not The above statement apply ONLY to those products dis- installed and used according to the instructions found in the tributed by Yamaha Corporation of America or its subsid- users manual, may cause interference harmful to the opera- iaries.
Seite 4
System Example / Exemple de connexion / Anschlußbeispiel / Systemexempel / Esempio di sistema / Ejemplo del sistema / Aansluitingsvoorbeelden / ____________ Example 1 YST-MSW5 LINE IN LINE OUT AUTO POWER ABOVE 150Hz ON OFF LINE IN LINE OUT ABOVE 150Hz...
Seite 5
English Italiano 1 Speaker System with Connecter for Subwoofer 1 Sistema diffusori con connettore per subwoofer 2 3.5 mm stereo mini-plug cable (not include) 2 Cavo con minispina stereo di 3,5 mm (non incluso) 3 3.5 mm stereo mini-plug cable (Accessories) 3 Cavo con minispina stereo di 3,5 mm (Accessori) 4 Personal computer 4 Personal computer...
Then, use the YST-MSW5’s VOLUME control to adjust the overall volume. • If the YST-MSW5 is connected to an output jack for a sub-woofer on a powered main BASS VOLUME speaker (such as a Yamaha YST-M15, YST-M7, etc.) as shown in System example 2 on...
Quindi usare il comando VOLUME dello YST-MSW5 per controllare il livello globale del volume. • Se lo YST-MSW5 è collegato ad una presa di uscita per subwoofer di un diffusore prin- cipale amplificato (come lo YST-M15, YST-M7, ecc. Yamaha) come mostrato...
Thank you for purchasing Yamaha’s YST-MSW5 Powered Multimedia Subwoofer. Yamaha’s Active Servo Technol- ogy offers exceptionally high performance. Cautions Connections & Controls Please read the following operating precautions before Front Panel use: Refer to the illustrations on page 1. • When disconnecting the AC power cord from an AC POWER switch and indicator: Press the POWER receptacle, hold and pull the plug, not the power cord.
If the speakers fail to operate normally, check the following table. It lists common operation errors and simple measures that you can take to correct problems. If a problem cannot be corrected, or the symptom is not listed, disconnect the AC power cord and contact your authorized YAMAHA dealer or service center for help. FAULT...
Seite 10
YAMAHA CORPORATION Printed in China VY63010...