Frequently Asked Questions - Asus RP-AC68U Startanleitung

Frequently Asked Questions

Q1: What should I do if my router does not support WPS?
• You can use Option A to set up RP-AC68U.
Q2: Why is that the Wi-Fi LED does not light up after completing Method Two?
• Y ou may have entered the wrong router SSID and password. Reset your RP-AC68U, double check your router SSID/password, and
set up RP-AC68U again.
Q3: Why is it that I cannot see the login page after entering http://repeater.asus.com in the browser?
• E nsure that your computer is connected to the repeater network only, and set your computer to Obtain an IP address automat-
ically.
Q4: My router security is WEP, and I entered a wrong passphrase or security key on the repeater. Now I
cannot access the Repeater any more. What can I do?
• T he Repeater cannot check whether the WEP passphrase is correct or not. When entered a wrong passphrase, your wireless
device cannot get the correct IP address from the Repeater. Please reset the Repeater to its factory defaults to get the IP address
back.
Q5: How do I reset RP-AC68U?
• Press the RESET button at the bottom of RP-AC68U for about two (2) seconds. Wait for about five (5) seconds until the Wi-Fi LEDs
blink slowly.
Q6: Why doesn't the 5GHz signal indicator of the Repeater light up?
• C heck whether your router supports 5GHz band. If your router is single band, the Repeater's 5GHz Signal Indicator will not light
up and it works at 2.4GHz band only.
6
U10787_RP-AC68U_QSG.indb 6 2015-10-19 15:22:32