Herunterladen Inhalt Inhalt Diese Seite drucken

Start-Up And Operation; Care And Maintenance - Hama Opal Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Opal:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
• Do not modify the product in any way. Doing so voids the warranty.
Note
• When using this product, observe the applicable local traffic laws and regulations.
• Take care that components such as airbags, safety areas, controls, instruments, etc.
and visibility are not blocked or restricted.
4. Startup and Operation
Note – Connecting terminal devices
• Before connecting a terminal device, check whether the power output of the charger can
supply sufficient power for the device.
• Ensure that the total power consumption of all connected terminal devices does not exceed
2100 mA.
• Please refer to the instructions in the operating manual of your terminal device.
• Plug the charger into a car socket in the vehicle electrical system.
• When the power supply is active, the status LED (1) lights up in blue. The charger is now ready
for use.
• Connect the Micro USB connector (3) to the terminal device to be charged.
• Alternatively, you can also connect the terminal device to be charged to the USB port (2) directly or
using a suitable USB cable.
• Disconnect all cable and mains connections after use.
Note
For some vehicle types, the ignition has to be switched on to supply power to the 12 V car socket.
For more information, please refer to your vehicle's manual.

5. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning
agents. Make sure that water does not get into the product.
3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

00124571

Inhaltsverzeichnis