Warming Up Buns - Beko TAM6202W Bedienungsanleitung

3 Operation
C
After the start lever (2) springs back
up, you can use high-lift function by
pushing the start lever (2) upwards.
Be very careful when taking the
C
toast slices out of the toaster as the
metal parts of the toaster and also
the bread can become very hot.
4. Disconnect the appliance from the wall socket.

3.5 Warming up buns

This toaster is equipped with an external warming
rack (9).
C
Do not toast bread and warm up
buns at the same time.
C
Do not warm up toast slices on the
warming rack (9). The toast slices
hinder sufficient ventilation.
If you accidentally activate the
wrong mode (defrost instead of
C
reheat or reheat instead of defrost),
then the selected mode must be
cancelled first by pressing the stop
button (6) before you can select the
right mode.
1. Put the warming rack on the housing (8) and
place it into the gaps
2. Place the buns on the warming rack (9).
3. Connect the power plug into the wall socket.
4. Using the browning control (3) select the
desired degree of warming.
5. Press down the start lever (2).
– The indicator light of the stop button (6)
illuminates and the warming up process
begins.
6. Turn the buns in order to reach a consistent
browning.
10 / 74 EN
7. The appliance automatically switches off as
soon as the set degree of warming has been
reached.
– The start lever (2) springs back up; and the
stop button (6) light goes off.
C
To stop the warming up process
before it has finished press the stop
button (6).
8. After warming up the buns take them off
the rack and and put the warming rack by the
warming rack handles off.
9. Disconnect the appliance from the wall socket.
WARNING: The buns and the
A
housing (8) of the toaster can
become very hot during and directly
after the toasting process. Do not
touch them with bare hands.
Toaster / User Manual