Filling The Water Tank; Setting The Temperature - Philips Aquazur HI845 Bedienungsanleitung

Filling the water tank

Never immerse the iron in water.
1 Unplug the appliance and make sure you don't squeeze the
steam trigger.
C
◗ If the water tank is in horizontal position, fill the it up to the MAX
level indicated on the side or in the filling opening.
C
◗ If the water tank is in vertical position, fill it up to the MAX
indication on the side. Do not exceed this level.
Do not put perfume, vinegar, starch, descaling agents, ironing additives
chemically descaled water or other chemicals in the water tank.

Setting the temperature

1 Put the iron on the rubber mat.
C
2 Set the required ironing temperature by turning the
temperature dial to the appropriate position.
Check the laundry care label for the required ironing temperature:
- 1 Synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)
- 1 Silk
- 2 Wool
- 3 Cotton, linen
If you do not know what kind(s) of fabric(s) an article is made of,
determine the right ironing temperature by ironing a part that will not
be visible when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse side of the fabric
to prevent shiny patches. Avoid using the spray function to prevent
stains.
Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibres.
3 Put the mains plug in an earthed wall socket.
4 When the amber temperature pilot light has gone out, wait a
while before you start ironing.
The amber pilot light will go on from time to time during ironing.
ENGLISH
9