Herunterladen Inhalt Inhalt Diese Seite drucken

Lighting Instructions - Napoleon LEX 485 Handbuch

Vorschau ausblenden Andere Handbücher für LEX 485:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

8

Lighting Instructions

EN
WARNING!
WARNING!
valve.
2. Push and turn any main burner
knob to the high position. If the
pilot lights, continue to push down
on the control knob until the burner
3. If the pilot does not ignite, then
immediately turn the control knob
back to the 'off position and repeat
4. If the pilot and burner will not
ignite within 5 seconds, turn the
control knob to the 'off' position
and wait 5 minutes for any excess
gas to dissipate. Either repeat steps
2 and 3 or light with a match.
match, clip the match into the
supplied lighting rod. Hold the
lit match down through the grill
and sear plate while turning the
corresponding burner valve to high.
WARNING!
www.napoleongrills.com
Lights
Left Burner
Rear Burner
Open lid.
Ensure all burner controls are in the off position. Turn on the gas supply
Main Burner
Lighting
1. Open grill lid.
lights and then release.
step 2 several times.
5. If lighting the unit with a
Do not use the rear burner with the main burners operating.
Centre Left
Centre Right
Burner
Burner
Right Burner
Rear Burner Lighting
(If equipped)
1. Open grill lid.
2. Remove the warming rack.
3. Push and turn the rear burner
control knob slowly to the 'hi'
position. This action will ignite
the pilot flame, which will in turn
light the burner. If the pilot lights,
continue to push down on the
burner control knob until the burner
lights then release.
4. If the burner does not ignite, then
immediately turn the control knob
back to the 'off' position and repeat
step 3 several times.
5. If the burner will not ignite within
5 seconds, turn the control knob to
the 'off' position and wait 5 minutes
for any excess gas to dissipate.
Either repeat steps 3 and 4 or light
with a match.
Side Burner
Igniter
Off Position
Side Burner Lighting
(If equipped)
1. Open side burner cover.
2. Push and turn the side burner
control to the high position.
3. Push and hold the electronic
igniter button until the burner
lights, or light with a match.
4. If the burner will not ignite
within 5 seconds, turn the control
knob to the 'off' position and wait
5 minutes for any excess gas to
dissipate. Either repeat steps 2 and
3 or light with a match.
N415-0433CE-GB-DE OCT 09.17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis