Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Klarstein 10011462 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für 10011462:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Changing and cleaning the fi lter for ACV-61A & ACV-61B:
• Put the fi lter into the water of 40-50℃,Put some detergent in, and leave it for 2-3 minutes. Then
use the soft brush to clean it with proper strength, in order not to damage the fi lter.
• The fi lter can be cleaned by dish washer. Put the fi lter into the dish washer and put some
detergent in, then turn the temperature to 60℃.
All the fi lters are made of metal. Please do not use any corrosive detergent when cleaning.
All the fi lters are made of metal. Please do not use any corrosive detergent when cleaning.
• Notice: Please unplug before cleaning.
LIGHT REPLACING
1) Before changing the lights, make
sure that the appliance is plugged off.
2) Open the fi lter , see beside picture.
3) Change the Max. 40W E14 olive-shaped bulb.
4) Replace the fi lter to the original position.
Symptom
The cooker hood does not start.
The cooker hood is not working
Effectively.
The cooker hood has switched off
during operation.

Troubleshooting

Solution
● Check that the hood is connected to the electricity supply.
● Check that the fan speed control is set properly.
● The fan speed is not set high enough.
● The grease fi lter is dirty.
● The kitchen is not ventilated well enough.
● If the hood is set for recirculation, check that the carbon fi lters
have not expired.
● If the hood is set for extraction, check that the ducting and out-
lets are not blocked.
● The safety cut-out device has been tripped.
● Turn off the hob and then wait for the device to reset.
● Note that if you have installed your cooker hood too low, this will
happen.
● If it happens frequently, it will be damaged.
16

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis